Sludge Waste Incinerator And Municipal Waste Incineration Technology
Rotary Kiln Incinerator Introduction:
Rotary kiln for Waste incineration (Rotary Kiln Incinerator) is usually used to burn pretreated and homogenized waste that requires size reduction, shredding, and manual sorting. The system consists of a burning layer of waste in a rotating cylinder. Rotary Kiln Incinerator is a widely used incineration equipment in the field of international industrial waste treatment, its market share in the field of industrial waste incineration is really high.
Rotary Kiln Incinerator Working Principle:
Rotary Kiln Incinerator can deal with solid and liquid waste simultaneously, solid waste is sent into rotary kiln by special conveying equipment, liquid waste is sprayed into the feed end of the Rotary Kiln Incinerator body by means of an efficient atomizing device, the waste in the rotary kiln should experience the process of water evaporation, volatilization analysis, ignition and combustion process, The ash portion is discharged from the bottom of the second combustion chamber, the generated flue gas enters the second combustion chamber, blended with two combustion air in the second compartment, complete combustion of flue gas, achieve exhaust safety standards discharge.
Rotary Kiln Incinerator Application:
It is widely used in the field of industrial waste, medical waste, municipal solid waste, and so on.
Specifications:
| Hazardous waste rotary kiln for waste incinerationφ2.6m*13.2 technical parameter. |
| Inner diameter of shell 2600mm | Shell length 13200mm |
| Downstream arrangement, that is, the direction of material flow is consistent with the direction of smoke flow, the angle of the kiln body is 1.5 degrees. |
| Variable frequency speed control of rotary kiln | 0.1-2.2r/min |
| Drive mode | Single side gear drive |
| Main Motor | 30kw |
| Kiln temperature:850-1200 degree | Surface temperature of kiln shell: 180 degree |
| Expansion mode | Linear free expansion at both ends |
| Total equipment weight | approx. 54.5t |
| ★Customized waste incineration rotary kiln can be provided according to the customers' different industries |
Rotary Kiln Incinerator Structure:
1.The supports use rolling bearing which simplified bearing structure. It reduces energy losses during Rotary Kiln Incinerator operation and makes Rotary Kiln Incinerator easier to maintain and repair;
2.In order to convenient installation and commissioning, there is a kiln slow rotating devices to maintain kiln nonconventional running operation while main transmission system is under overhaul or other abnormal conditions which can occur cylinder bending and deformation during the cooling process.
3.The Rotary Kiln Incinerator uses mechanical or hydraulic catching wheels. They are high accuracy and reliability. The ridding rollers and tires are evenly wearing on the entire width direction and are handy adjustment.;
Rotary Kiln Incinerator Advantages:
1. Adaptability to incineration: Solid waste ,liquid, colloid, and gas can be incinerated simultaneously
2. Easy to operate and maintain: Equipment running rate is high. The annual operation rate is generally 90%
3. Low cost: High temperature material contact refractory material. Replacing lining is convenient;
4. Ensure that harmful gases do not leak: Good sealing measures and furnace negative pressure.
Product Tags:
|
|
Sludge Municipal Rotary Kiln Waste Incineration Calcination Equipment Images
|
